Production of fatty acids by engineered Ogataea polymorpha / 生物工程学报

Fatty acids (FA) are widely used as feed stocks for the production of cosmetics, personal hygiene products, lubricants and biofuels. Ogataea polymorpha is considered as an ideal chassis for bio-manufacturing, due to its outstanding characteristics such as methylotroph, thermal-tolerance and wide substrate spectrum. In this study, we harnessed O. polymorpha for overproduction of fatty acids by engineering its fatty acid metabolism and optimizing the fermentation process. The engineered strain produced 1.86 g/L FAs under the optimized shake-flask conditions (37℃, pH 6.4, a C/N ratio of 120 and an OD600 of seed culture of 6-8). The fed-batch fermentation process was further optimized by using a dissolved oxygen (DO) control strategy. The C/N ratio of initial medium was 17.5, and the glucose medium with a C/N ratio of 120 was fed when the DO was higher than 30%. This operation resulted in a titer of 18.0 g/L FA, indicating the potential of using O. polymorpha as an efficient cell factory for the production of FA.

Fermentations of xylose and arabinose by Kluyveromyces marxianus / 生物工程学报

Kluyveromyces marxianus, as unconventional yeast, attracts more and more attention in the biofuel fermentation. Although this sort of yeasts can ferment pentose sugars, the fermentation capacity differs largely. Xylose and arabinose fermentation by three K. marxianus strains (K. m 9009, K. m 1911 and K. m 1727) were compared at different temperatures. The results showed that the fermentation performance of the three strains had significant difference under different fermentation temperatures. Especially, the sugar consumption rate and alcohol yield of K. m 9009 and K. m 1727 at 40 ℃ were better than 30 ℃. This results fully reflect the fermentation advantages of K. marxianus yeast under high-temperature. On this basis, five genes (XR, XDH, XK, AR and LAD) coding key metabolic enzymes in three different yeasts were amplified by PCR, and the sequence were compared by Clustalx 2.1. The results showed that the amino acid sequences coding key enzymes have similarity of over 98% with the reference sequences reported in the literature. Furthermore, the difference of amino acid was not at the key site of its enzyme, so the differences between three stains were not caused by the gene level, but by transcribed or translation regulation level. By real-time PCR experiment, we determined the gene expression levels of four key enzymes (XR, XDH, XK and ADH) in the xylose metabolism pathway of K. m 1727 and K. m 1911 at different fermentation time points. The results showed that, for thermotolerant yeast K. m 1727, the low expression level of XDH and XK genes was the main factors leading to accumulation of xylitol. In addition, according to the pathway of Zygosaccharomyces bailii, which have been reported in NCBI and KEGG, the xylose and arabinose metabolic pathways of K. marxianus were identified, which laid foundation for further improving the pentose fermentation ability by metabolic engineering.

Heterologous expression, purification and characterization of exo-inulinase from Kluyveromyces marxianus YX01 / 生物工程学报

To improve the inulinase application in biotechnology, the characteristic of inulinase from Kluyveromyces marxianus YX01 was investigated. The inu gene of K. marxianus YX01 was transformed into Pichiapastoris GS115 host cells with molecular biology techniques. Then we achieved the heterologous expression of exo-inulinase whose molecular mass was about 86.0 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Furthermore, six His-tag was added to the inulinase and a two-step method was applied in the purification of inulinase, including concentration via dialysis by polyethylene glycol 20 000 and metal Ni-NTA Agarose affinity adsorption. The purification factor of purified protein was 3.6 and the recovery rate of enzyme activity was 33.1%. We characterized the purified inulinase. The optimum temperature was 60 degrees C and pH was 4.62. When inulin and sucrose were used as substrates, the K(m) and V(max) values were 80.53 g/L vs 4.49 g/(L x min) and 183.10 g/L vs 20.20 g/(L x min), respectively. In addition, metal ions including Mn2+, Ca2+, Cu2+, Zn2+ and Fe2+ exhibited different degrees of inhibition on the enzyme activity, and Cu2+, Zn2+ and Fe2+ exhibited the most significant inhibition. Our findings might lay a good foundation for industrial application of inulinase.

Effect of aeration and inulin concentration on ethanol production by Kluyveromyces marxinaus YX01 / 生物工程学报

Consolidated bioprocessing technology can be used for Kluyveromyces marxianus YX01 to produce ethanol from Jerusalem artichoke, which is one of the potential processes to produce biofuel from non-cereal crops. In this study, we combined the aeration rate with the substrate concentration to conduct cross-over experiments for K. marxinaus YX01, and studied ethanol fermentation and the influence of inulin enzyme activity. The substrate concentration had a little repressive effect on ethanol productivity. When substrate concentration reached 250 g/L under anaerobic conditions, ethanol concentration was 84.8 g/L, and ethanol yield was reduced from 86.4% (50 g/L substrate concentration) to 84.7% of the theoretical value. Aeration rate could accelerate K. marxinaus YX01 ethanol fermentation, but reduced ethanol yield. When substrate concentration reached 250 g/L under aeration at 1.0 vvm, ethanol yield was reduced from 84.7% under anaerobic conditions to 73.3% of the theoretical value. With increased concentration of the carbon source and reduced aeration rate, the inulinase of K. marxinaus YX01 reduced and the concentration of glycerol increased, however, the acetic acid increased with the increased concentration of the carbon source and aeration rate. When substrate concentration reached 250 g/L under anaerobic conditions, inulinase activity was only 6.59 U/mL; when substrate concentration reached 50 g/L under aeration at 1.0 vvm, inulinase activity was 21.54 U/mL.